FAQs归档 - Kaigui Machinery, Boost productivity with automated T Bar machines for efficient production.

Q: The Product Accuracy made by our machine?

About the Ceiling T Bar product, we have highest standard for the accuracy, In the width regard, we can keep within 0.1mm, in the length, we can keep 0.2mm per meter.

Q: How many stations of FUT T bar Roll Forming Machine?

We are the first producer of FUT T bar Roll Forming Machine and we export to Middle east many sets. The stations is 23. And the gap and hole punching done at same time on the production line while only the head lock need press

Q: Why do we make Semi-Automatic for 1200mm FUT T bar machine instead of Fully Automatic? Why can 600mm FUT T bar do Fully Automatic?

We can do Fully automatic 1200mm FUT cross Tee bar, and some customers demand this way, but because the FUT have the gap and hole punching at the same time, if head lock also on the production line, we can’t use our Flying Cutting off system and must stop to punch separately, which will affect the speed of production and the cost also high than the semi-automatic, so for customer benefit, we can don’t recommend, but 600mm Cross Tee Bar will not this issue, we can do the Fully Automatic with Flying Cutting off system.

Q: Can you do Worm wheel gearbox reducer?

Yes we can use Worm Wheel Gearbox on our production line and if for cost-sensitive market, I don’t recommend, which will increase some cost, but don’t worry our Gear transmission technology is as well as the Worm wheel Gearbox but Worm wheel Gearbox will be the trend in the future

Q: Why do Semi-Automatic for FUT Main Tee and 1200mm Cross Tee while 600mm Cross Tee can do Fully Automatic?

Because the FUT Main Tee and 1200mm Cross Tee have the gap and hole punching at the same time, if head lock also on the production line, we can’t use our Flying Cutting off system and must stop to punch separately, which will affect the speed of production and the cost also high than the semi-automatic, so for customer benefit, we can don’t recommend, but 600mm Cross Tee Bar will not this issue, we can do the Fully Automatic with Flying Cutting off system.

Q: what brand for the Inverter?

Our inverter is Tech from Taiwan brand. The part is a core one in the electric controlling cabinet, And adjust the the machine speed. Our whole Electric Controlling cabinet is integral system and our superb electric technician can make it very good performance.

Q: Can do Customer Language for the Electric PLC Cabinet?

Yes, we can do the customer’ language, it is easy for us, but maybe we need customer to offer the translation help or check to make sure all right.

Q: The base GI width range and face PPGI width and thickness?

The GI PPGI width range depends on the specified design for each product. But as usual, we can show you some for your reference: Flat Ceiling Tee bar: For 32 x 24 PPGI: 28.6mm, GI: 90mm; For 38x24: PPGI: 28.6mm, GI: 102mm For FUT T Grid 32x24: PPGI: 108mm; 38x24 PPGI 120mm For Stereo/Silhouette T Bar: 32x15X6 PPGI: 96mm 38x15x6 PPGI: 108mm 32x15x8 PPGI: 100mm 38x15x8 PPGI: 112mm

Q: Why is there certain distance every each station? Can you do shorter Machine, Because of our factory space limit?

The virtue of our Main Former is stable and the distance of each roller is our valuable experience, this is our exclusive technology. If the roller distance too close or too far, when machine commissioning it will be difficult and if too close, the incremental forming will be faster and it is not good for the end product. So the current Forming line is just good and actually even we shorten the distance of the roller, it can not save much space, at most 1-2meters. Considering the T bar quality, the current distance is just good to make gradual incremental forming.

The Product Accuracy made by our machine?

About the Ceiling T Bar product, we have highest standard [...]

By admin|2023-11-01T01:36:07+00:0031 10 月, 2023|Categories: Technical problem|已关闭评论

How many stations of FUT T bar Roll Forming Machine?

We are the first producer of FUT T bar Roll [...]

By admin|2023-11-01T01:36:29+00:0031 10 月, 2023|Categories: Technical problem|已关闭评论

Why do we make Semi-Automatic for 1200mm FUT T bar machine instead of Fully Automatic? Why can 600mm FUT T bar do Fully Automatic?

We can do Fully automatic 1200mm FUT cross Tee bar, [...]

By admin|2023-11-01T01:36:36+00:0031 10 月, 2023|Categories: Technical problem|已关闭评论

Can you do Worm wheel gearbox reducer?

Yes we can use Worm Wheel Gearbox on our production [...]

By admin|2023-11-01T01:36:48+00:0031 10 月, 2023|Categories: Technical problem|已关闭评论

Why do Semi-Automatic for FUT Main Tee and 1200mm Cross Tee while 600mm Cross Tee can do Fully Automatic?

Because the FUT Main Tee and 1200mm Cross Tee have [...]

By admin|2023-11-01T01:37:06+00:0031 10 月, 2023|Categories: Technical problem|已关闭评论

Can the PLC brand be SIEMENS PANSONIC or HITACHI?

Our Electric controlling PLC cabinet is our strength. We have [...]

By admin|2023-11-01T01:37:32+00:0031 10 月, 2023|Categories: Other related issues|已关闭评论

what brand for the Inverter?

Our inverter is Tech from Taiwan brand. The part is [...]

By admin|2023-11-01T01:37:24+00:0031 10 月, 2023|Categories: Other related issues|已关闭评论

Can do Customer Language for the Electric PLC Cabinet?

Yes, we can do the customer’ language, it is easy [...]

By admin|2023-11-01T01:37:40+00:0031 10 月, 2023|Categories: Other related issues|已关闭评论

The base GI width range and face PPGI width and thickness?

The GI PPGI width range depends on the specified design [...]

By admin|2023-11-01T01:37:53+00:0031 10 月, 2023|Categories: Technical problem|已关闭评论

Why is there certain distance every each station? Can you do shorter Machine, Because of our factory space limit?

The virtue of our Main Former is stable and the [...]

By admin|2023-11-01T01:38:14+00:0031 10 月, 2023|Categories: Customer FAQ summary|已关闭评论

FAQs

Title